where the dashboard changes into a traditional sunshade structure, but still


where the dashboard changes into a traditional sunshade structure, but still

Contact us

cooperationlike@gmail.com

As can be seen from the above picture, through horizontal shading, a certain direct area can be reduced on the outer window, which makes the radiation heat to the building caused by the heat of the outer window (red wave arrow part). At the same time, through the upper reflective surface of the sunshade, the sunlight is reflected to the ceiling of the building, and then through the diffuse reflection of the ceiling, the daylighting inside the building is increased (orange wave arrow part). It should be noted that this part of the reflected light also brings part of the energy into the room, which will cause indoor load, but the heat of reflected radiation can be reduced by using selective reflection coating, therefore, the heat caused by this part of solar reflected radiation can be considered to be much less than that caused by direct sunlight.

If you build a color steel activity room mainly for the recommendation of growing flowers in winter, it is required that the size of the container activity room should be well measured, appropriate sunshine, plastic windows should be selected for peripheral maintenance, and a color board activity room with a larger skylight is opened on the glass roof. The price of this kind of mobile room is lower, but the indoor temperature is higher in summer and sunshade is needed. If you are because of the small housing area, in order to expand the living space, the privacy of the built mobile house requires high privacy and low economic level, then you can choose thermal insulation board roof, plastic steel window and thermal insulation wall as peripheral maintenance products. Although this kind of products are not strictly resident containers, they are cheap, economical and practical. The disadvantage is poor lighting and general ventilation. If the skylight is added, it will be greatly improved. Choose the right materials and learn how to maintain the container office so that we can live comfortably and comfortably.

where the dashboard changes into a traditional sunshade structure, but still

Our main products are various specifications of national standard hot-dip galvanized steel grid, stainless steel grid of all kinds of materials, special anti-corrosion treatment steel grid, all kinds of non-standard steel grid, special-shaped steel grid, composite steel grid, marine steel grid; carbon steel ball steel railings, stainless steel ball joint steel railings, aluminum alloy railings; all kinds of carbon steel ladders, stainless steel ladders, aluminum alloy steel ladders Step boards, various ditch covers, green tree pool covers, fence protective walls, ceilings, ceiling grille, sunshade grille, pipe supports and hangers, all kinds of metal components and other non-ferrous metal structures, etc.

Nanchang underground parking entrance membrane structure customized, sunshade. The membrane structure parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ 37 ℃. The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid secondary pollution to cars and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the membrane structure parking shed to remove dirt in the pipe.

42-inch panoramic sunscreen with sunshade electric adjustment not only makes the vehicle interior space transparent, spacious and comfortable, but also can be isolated from ultraviolet light at any time, with an isolation rate of more than 94%; the whole car also has 15 rich and flexible storage spaces, including the central CONSOLE open storage box, the front and rear door inner side panel, the left side slot of the main driving dashboard, the main driving handle box, etc., and then more fragmentary small objects can be easily loaded.

There are two kinds of interior design, high-end version is a common conjoined screen design, the back has a through-style air conditioning tuyere, so that the entire center console is extremely flattened. The part of the air-conditioning system uses a physical button panel, which is arranged in front of the sub-dashboard, and the flight-style electronic file handle is also frequently seen in the design of independent brand models. The latest spy photo also reveals a low-profile version, which may be mainly designed for the needs of the travel market. The difference is mainly in the upper part of the central console, where the dashboard changes into a traditional sunshade structure, but still uses a full LCD screen configuration. The multimedia system is an exposed cavity that can be equipped with devices such as a simple radio multimedia player or a taximeter.

where the dashboard changes into a traditional sunshade structure, but still

At present, spray-free plastics have been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.

Since the world is colorful, and we choose a variety of Japanese half-skirts, then our modeling should have more performance. If you want to be more aging and elegant, you might as well match the rest of the items to make the styling more stylish and dazzling. Whether it is an exquisite bag or a sweet sunshade hat, it can be natural and beautiful with a Japanese half skirt.